R-BRUSH Manual Plastic Brushes
Brush accessory for cleaning out holes prior to anchor installation
Features and benefits
- Ideal for cleaning dust from drilled holes prior to applying bonded anchors or installing mechanical anchors
- Hole cleaning is necessary for correct loads
- Several embedment depths possible
- Suitable for repetitive and frequent use.
Product information
Product Code |
Diameter |
Stud size |
Length |
Working length |
Material |
Raw material |
Colour |
D |
L |
||||||
[mm] |
- |
[m] |
[mm] |
- |
- |
- |
|
R-BRUSH-M08/10 |
15 |
M8-M10 |
385 |
105 |
Steel wire |
Nylon |
WHITE |
R-BRUSH-M10/14 |
20 |
M12-M14 |
385 |
105 |
Steel wire |
Nylon |
BLUE |
R-BRUSH-M16/28 |
30 |
- |
395 |
105 |
Steel wire |
Nylon |
RED |
Applications
- For use in a wide range of fastening applications in concrete and solid masonry structures
Installation guide
- Drill hole to the required diameter and depth for stud size being used.
- Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.
- Choose extensions and brushes to the selected depth and diameter of the hole, then combine them into one set.
- Connect the drill set with the SDS tip.
- Clean the hole twice with a prepared brush set.
- Clean the hole again with compressed air.
