R-RPS-PVC Hand Held Polyurethane Foam for PVC
Super low-pressure (with "low-expansion" formula), one-component polyurethane foam with delivery tube.
Features and benefits
- Low Expansion formulation (low growth) enables applications to narrow gaps, guarantees high yield (no wastes) and eliminates the risk of frame deformation
- Low-pressure formulation eliminates risk of frames deformation and ensures proper gaps filling
- Ideal for mounting, sealing and soundproofing, particularly for PVC profiles susceptible to deformation.
- Excellent sound and thermal insulation properties.
- Cutting time 40 min after apllication
- Excellent adhesion to most materials and substrates used in construction.
- Resistant to mould and fungi.
Base material
-
Concrete
-
Masonry
-
Wood
-
Metal Sheet & Profiles
-
PVC Profile
-
Window Profile
For use also with
-
Solid Concrete Block
-
Hollow-core Slab
-
Concrete Slab
-
.png)
Aerated Concrete Block
-
Lightweight Concrete Block
-
Hollow Lightweight Concrete Block
-
Silicate Blocks
-
High-Density Natural Stone
-
Hollow Brick
-
Vertically-perforated Clay Block
-
Hollow Sand-lime Brick
-
Solid Brick
-
Solid Sand-lime Brick
-
Ceramic Hollow Block
-
Gypsum Fibreboards
-
Plasterboard
-
Chipboard
-
Oriented Strand Board
-
Stainless Steel
Applications
- Fixing (for installation of doors and windows)
- Precise filling and sealing in the wide range of sizes gaps
- Thermal insulation of plumbing and central heating
- Installation & sealing of window sills
- Thermal insulation of roofing (including flat roofs)
- Filling gaps in the thermal insulation of buildings
- Filling frame structures
- Fixing pipes and cables in HVAC systems
- The application of PU foam: installation of windows and doors, filling, sealing, insulation in the construction industry
- Installation of windows and door
- Easy fixing of door and window frames - timber, metal or PVC
Installation guide
- Wear protective gloves. Ensure surfaces are free from dust, dirt or debris.
- Before using, make sure that the can temperature is above zero (optimum +20°C). Application temperature from +5°C up to +30°C.
- Shake can vigorously for 30 seconds to mix properly components.
- Screw straw-applicator onto the can. Hold can upside-down during application.
- Moisten surfaces with water prior to application.
- Fill gaps from down to up, zigzag motion, alternating from one wall to the other. Fill gaps to approximately 60 % volume. Max. wide of the gap 5 cm. Gaps wider than 5 cm should be applied after hardening of the previous layer. Each layer should be moistened with water using a spray.
- After full curing, cut the excess foam with a knife and protect it from UV exposure by coating with plaster, paint, acrylic or silicone.
